PLANET cube 70MC

Single-wall tank, with HORIZONTAL AXIS and containment basin.
Model approved and compliant with Ministerial Decree 22/11/2017.

Are you interested in this product?

Request information

Description

Single wall tank, with HORIZONTAL AXIS and containment basin.
Model approved and compliant with M. D. 11/22/2017.
Made of 1st choice S235JR carbon steel, thickness 3 mm.
Complete with:
Manhole Ø 400 mm. bolted with oilproof gasket and galvanized bolts having;

– 3 ” inlet pipe with ring nut and bayonet cap in brass, Atex approved, padlockable
– vent pipe with Atex approved flame arrestor terminal in brass
– 3″ load limiting valve to 90% approved

– indicator mechanical level with float
– electrical system according to EC standards with emergency button and key to activate the supply and electric sensor for blocking the minimum level pump.
– bottom drain with safety cap for any periodic cleaning
– access steps to the manhole for comfortable and safe access during refueling (starting from 3000 liters capacity)
– lifting eyebolts for vacuum handling
– canopy fixing predisposition welded to the tank

Located in containment basin with a capacity equal to 110% of that of the tank itself (as prescribed by the Ministerial Decree 22/11/2017) equipped with support crosspieces for handling with a forklift.
Tank and containment basin are painted in double layer (bottom and dark green finish) with specific products for outdoor use.

MODEL

 CAPACITY

MAXIMUM DIMENSIONS WITHOUT PROTECTION

mm

MAXIMUM DIMENSIONS WITH PROTECTION

mm

THICKNESS

mm

WEIGHT

kg

1.500 (1.350 lt.) 1.520 x 1.770 x h 1.700 1.750 x 2.100 x h 2.100 3 530
2.000 (2.093 lt.) 1.520 x 2.300 x h 1.700 1.750 x 2.850 x h 2.100 3 600
3.000 (3.141 lt.) 1.720 x 2.570 x h 1.850 1.950 x 2.850 x h 2.250 3 680
4.000 (4.024 lt.) 1.970 x 2.670 x h 2.000 2.120 x 2.850 x h 2.400 3 750
5.000 (4.931 lt.) 2.170 x 2.770 x h 2.200 2.320 x 3.100 x h 2.600 3 810
6.000 (5.958 lt) 1.970 x 3.670 x h 2.000 2.120 x 4.100 x h 2.400 3 970
7.000 (6.952 lt.) 2.170 x 3.470 x h 2.200 2.320 x 4.100 x h 2.600 3 1.070
8.000 (7.833 lt.) 2.220 x 3.820 x h 2.200 2.310 x 4.100 x h 2.600 3 1.100
9.000 (8.890 lt) 2.220 x 3.820 x h 2.300 2.420 x 4.100 x h 2.700 3 1.320

CUBE 70 MC dispensing system
diesel dispenser for private use, usable only by qualified personnel able to manage up to 50 users.
Equipped with self-priming pump with by-pass incorporated, NOMINAL FLOW 70 lt / min (V 230), PULSER liter-counter with pulse emitter (accuracy 1%), automatic nozzle with swivel connection and mt. 4 of flexible piping for fuels.
Electronic control unit with keyboard and display for entering codes, local memory of the last (255) deliveries, management of date, time, liters dispensed, vehicle license plate and km.
USB discharger and original software for PC in WEB EDITION *** version to print the dispensing.
Nr. 10 electronic keys for user recognition (yellow color)
Nr. 1 electronic key for data download (manager key)

*** The PC on which the software will be installed must have a permanent internet connection (license check every 5 days). The license can be used on 1 PC for a single installation.

Data sheet

DOWNLOAD THE TECHNICAL SHEET

    Request information for the product:

    Your data

    The undersigned provides the following information regarding the use of the personal data that you provide by filling in this form, in compliance with the provisions of Regulation (EU) 2016/679 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data (also known as the GDPR). The personal data which concern you and which you have spontaneously provided by filling out the forms are collected exclusively to allow contact with the company and, eventually, perform the Contract concluded with you. The provision of the data in question by you is mandatory; your eventual refusal will not allow us to provide you with the product/service which you have requested (potentially exposing you to liability for breach of contract) and, in any case, to process your request. The data will be disclosed only to the members f staff of our company who have been tasked with the processing of such data and always for the purposes mentioned. We would also like to remind you that, by submitting a request to the data controller, you may exercise all the rights granted by articles 15 to 22 of the aforementioned Regulation (EU), which give you the right, in particular, to request access to the personal data and receive a copy thereof (article 15 of the GDPR), the right to rectification (article 16 of the GDPR), and to the erasure of the data (article 17 of the GDPR), the right of restriction of the processing that concerns you (article 18 of the GDPR), the right to the portability of the data (article 20 of the GDPR, if the requirements are met) and the right to object to the processing that concerns you (articles 21 and 22 of the GDPR, for the cases mentioned above and, in particular, in case of processing for marketing purposes or that is carried out via an automated decision-making process, including profiling, which produces legal effects that concern him/her, if the requirements are met). The data controller also recognises, in cases where the processing is based on consent, your right to withdraw said consent at any time, without prejudice to the lawfulness of the processing based on the provided consent prior to the withdrawal; in order to do this, you may at any time unregister by contacting the data controller at the addresses published on the website. The data controller would also like to inform you of your right to lodge a complaint with the Personal Data Protection Authority in its capacity as supervisory authority in Italy and to bring court proceedings both against a decision of the Data Protection Authority and against the data controller and/or a data processor.
    * I authorize the processing of data